直纺亮光抗倒伏波浪扁平涤纶FDY的开发

探讨了直纺83 dtex/114 f波浪扁平涤纶全拉伸丝(FDY)的工艺制备过程。试验证明,在熔体输送温度276~282℃,纺丝温度286~290℃,喷丝板规格DIO φ104 mm-114孔、"王"字形,环吹风压10~15 Pa,含油率1.1%~1.2%,卷绕速度3 800~4 200 m/min的工艺参数下纺制83 dtex/114 f波浪扁平涤纶FDY时,生产稳定,满卷率高,外观情况良好,袜带均匀亮丽,可批量生产。此新产品可用于制作高档布艺沙发表层面料,具有抗倒伏、色彩艳丽等功效。     

凉感纤维织物导热系数影响因素的探讨

采用普通涤纶、含1%云母颗粒的涤纶(1%云母/涤纶)以及含5%云母颗粒的涤纶(5%云母/涤纶)三种材质,上机纬密采用200根/10 cm、300根/10 cm、400根/10 cm,组织采用平纹、斜纹、缎纹试织试样。通过Hot Disk热常数分析仪,采用正交试验及极差、方差分析,研究了纤维材质、上机纬密、组织对凉感纤维织物导热系数的影响。结果表明:在试验设置变量范围内,纤维材质对导热系数的影响显著,上机纬密、组织对导热系数的影响高度显著,影响因素从大到小顺序为上机纬密>组织>纤维材质。     

面向踝部康复的广义球面并联机构型综合

针对现有踝关节康复机器人难以充分拟合踝关节复杂运动，人机相容性较差的问题，提出一系列与踝关节实际骨结构匹配程度更高的串联等效拟合模型。为满足踝关节串联等效拟合模型对康复机器人机构本体的功能需求，给出一种具有串联等效拟合模型的广义球面并联机构型综合方法。首先枚举出广义球面机构的基本构件及运动副，并依此构造出广义球面支链。继而基于螺旋理论分析单支链以及多支链组合对动平台的约束性能，给出支链的组合条件与原则，阐明不同支链在机构中作用的异同，并依此归纳出位置支链和姿态支链两类广义球面基本支链。最后基于基本支链的约束特性，根据支链组合条件，综合出一系列适用于踝关节康复机器人本体研究的广义球面并联机构，并通过螺旋理论证明其与踝关节串联等效拟合模型的自由度数及性质具有一致性，为此类康复机器人本体设计提供理论依据。     

Effects of short carbon fiber on the macro-properties,mechanical performance and microstructure of SiSiC composite fabricated by selective laser sintering

Selective laser sintering was combined with reactive melt infiltration to fabricate SiSiC part, and the effects of carbon fiber (C_f) on the properties of the SLS green body, the carbonized and final SiSiC sample were investigated. Results show that the addition of an appropriate amount of C_f (1.59 wt%~2.97 wt%) can increase the bulk density and geometric precision of the sample at all stages, and improve the mechanical properties of green and carbonized samples. The main phases composed of the SiSiC composite were free Si, a-SiC, β-SiC, plus a very small amount of Al–Si alloy. With 1.59 wt% C_f addition, a relatively comprehensive favorable macro-properties of both the green sample and carbonized sample was achieved, and the homogeneous microstructure of the latter favored the decreased free Si content and increased β-SiC content of the final composite. The evolution mechanism of C_f added to the raw material is inferred to be the mutual diffusion of [C] and [Si] that occurred at the C_f/Si melt boundary leading to the formation of the siliconized C_f with relatively large diameter size (24.3 μm) and high aspect ratio (>30). Amorphous C, which derived from the pyrolysis of epoxy resin E12, undergone a dissolution-precipitation mechanism with the formation of fine-grain β-SiC.     

Nature of heterophase inclusions in high-purity optical fiber materials as studied with 3D laser ultramicroscopy

3D laser ultramicroscopy (3D LUM) is intended specially for determining the concentration and size distribution of submicron inclusions in the bulk samples of high-purity materials for visible and IR fiber optics. In this work the 3D LUM technique is shown to be able to identify the nature of individual inclusions detected. The measurement of the light scattered by an inclusion at a varied probe beam wavelength and polarization and at a varied scattered light collection angle makes it possible to determine the inclusion refractive index. The 3D LUM possibilities are illustrated by the example of studying the inclusion nature in the As₂S₃ glass samples prepared by the direct synthesis from elements in a quartz container at elevated temperatures.     

金川集团化工厂铜冶炼烟气制酸中温位余热回收

阐述金川集团化工厂530 kt/a铜冶炼烟气制酸系统扩能改造和余热回收前存在的问题,在遵循尽可能保留现有工艺管线和保证余热高效回收的原则上对转化工艺进行改造完善,将转化流程由原设计的“3+1/Ⅳ.Ⅰ-Ⅲ.Ⅱ”四段转化改为“3+2/Ⅴ.Ⅰ-Ⅲ.Ⅱ.Ⅳ”五段转化工艺流程,研发适合冶炼烟气制酸系统的分离型热管余热回收工艺技术.生产实践证明,该工艺在确保转化热平衡的基础上提升转化率,优化系统工艺技术指标,实现回收转化中温位富余热量生产饱和蒸汽,保证制酸系统与铜冶炼系统的匹配化生产,节能减排效益可观.     

主井井塔双梁吊钩桥式起重机安装

曲江矿井主井井塔+54m平台上,需安装1台Gm=32/5T型电动双梁吊钩桥式起重机。由于吊装高度较高,空间狭小,井塔封屋顶面期间,在屋顶面预留400mm×400mm小孔,作为+46m平台的提升吊装孔;在屋顶面中间预留600mm×600mm小孔,作为+54m平台吊装孔。吊装时,先吊装左梁,再吊装右梁,小车正好落在组装好的左、右梁轨道上;然后将起重机推到机房中间位置,进行调试,完成安装。     

生物质基材料改性的研究进展

综述了近几年国内各大院校在生物质改性方面的研究现状,重点介绍了植物纤维类、木质素类、淀粉类生物质的改性研究情况。生物质原料成分具有多样性,为获得性能优异的生物质改性产物,往往以多种改性方法共同应用为主;生物质资源储量丰富,来源广泛,使其改性产物可以应用在多个领域,前景广阔。     

Pull out of FRP reinforcement from masonry pillars: Experimental and numerical results

In this paper, debonding phenomena between carbon fiber reinforced polymer (CFRP) strips and masonry support were investigated on the basis of single-lap shear tests, considering different dimensions of the bond length. To capture the post-peak response of the CFRP–masonry joint, the slip between the support and the reinforcement strip was controlled using a clip gauge positioned at the end of the reinforcement. The tests were simulated by means of a finite element model able to capture the post-peak snap-back behavior due to the failure process. The numerical model is based on zero-thickness interface elements and on a proper non-linear cohesive law. The comparison between experimental and numerical results was performed in terms of overall response, measured by both the machine stroke and the clip gauge positioned at the free end of the reinforcement. The cases of effective bond length greater and lesser than the minimum anchorage length, suggested by the CNR Italian recommendation, were considered.     

Ultra-smooth BaTiO3 surface morphology using chemical mechanical polishing technique for high-k metal-insulator-metal capacitors

The surface roughness of barium titanate (BTO) following its implication by aerosol deposition method (ADM), is a very important characteristic affecting its potential for use in high-k metal-insulator-metal capacitors. The ADM is the best candidate to deposit ceramic films but has two major problems: macroscopic defects and rough interface effects on the BTO surface. In this work, a chemical mechanical polishing (CMP) technique is applied to obtain an ultra-smooth BTO surface morphology by the optimization of several factors including the slurry type, the head rotational speed, and the down pressure. Statistically, we were able to achieve a root mean square (RMS) value of the BTO surface of 1.746 nm by utilizing a two-step polishing process, applied at a head rotational speed of 70 rpm under 5 kg/cm² of down pressure; this RMS value is improved at least 8 times over previous studies. This analysis is based on representative pattern images, three-dimensional images, line profiles, histograms, and power spectra of selected BTO surface areas, further verified with data from both energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.